전체메뉴

전체메뉴 닫기

Products

Insert N-i90A series

NANOLOY Multifunctional Milling Tool

N-i90A series

Realizing low-cutting forces machining with 3D curved surface applied when high feed and high depth of cut.

MULTIFUNCTIONAL MILLING TOOL

  • 1. Possible to apply various range of milling
  • 2. Proper to machining general steel, mold steel and stainless steel
  • 3. Realized low-cutting force when high feed, high depth to cut machining → high efficiency machining
  • 4. Provide excellent performance in side machining

NUMBERING SYSTEM & FEATURES

NUMBERING SYSTEM
FEATURES (INSERT)
FEATURES (CUTTER)

  • Face

  • Side

  • Slotting

  • Inclined surface

  • Helical Milling

APPLICATION (INTERNAL / EXTERNAL TEST)

INTERNAL TEST (SUS304)
Stainless steel side milling
  • Workpiece : SUS304 (Austenite)
  • Cutting conditions : vc=130m/min, fz=0.25mm/z, ap=4mm, ae=4mm wet
  • Insert : APKT11T308PDER-NM /AC3025
  • Cutter : I90A11R3020S20
INTERNAL TEST (STD61)
Mold steel side milling
  • Workpiece : STD61
  • Cutting conditions : vc=120m/min, fz=0.3mm/z, ap=5mm, ae=3mm wet
  • Insert : APKT11T308PDER-NM / AC3025
  • Cutter : I90A11R3025S25
EXTERNAL TEST (SUS304)
Pipe flange
  • Workpiece : SUS304
  • Cutting conditions : vc=180m/min, fz=0.2mm/z, ap=4mm, ae=1.5 wet
  • Machining type : Face & Side
  • Insert : APKT11T308PDER-NM / AC3025
  • Cutter : I90A11R3020S20
- TEST Results -
TEST Results
  NANOLOY Competitor
Comparision of
wear resistance
Tool life
Results 160% Tool life increase
EXTERNAL TEST (STD61)
Mold base
  • Workpiece : STD61
  • Cutting conditions : vc=150m/min, fz=0.25mm/z, ap=5mm, ae=1.5 wet
  • Machining type : Face
  • Insert : APKT11T308PDER-NM / AC3025
  • Cutter : I90A11R3025S25
- TEST Results -
TEST Results
  NANOLOY Competitor
Comparision of
wear resistance
Tool life
Results 150% Tool life increase

Notice

공지사항 더보기

Back To Top